Kodėl dirbtinio rūko sistema?

Kiek galima sutaupyti?

Why the fog?

It is less expensive technology compared with alternative technologies applicable to air humidification, cooling, heating, dust control systems, security systems, etc. Artificial fog system is energy-efficient technology, saving water, electricity and labor costs.

How much can you save?

Air humidification using artificial fog system today is the most cheapest and most environmentally friendly method. Energy costs are greatly reduced air change traditional irrigation techniques in artificial fog system. You can save up to 60-70%. 

Comparison of technologies

Artificial Fog System (high pressure)
High Pressure Humidification systems are based on atomizing water using pressure. The pump skid pressurizes water to 1000psi where it is then atomized into a fog-like mist for easy absorption. These systems are very inexpensive to operate and are low maintenance.The humidity control cabinet, in conjunction with the remote mounted humidity sensor, continually monitors the area humidity. The system is automatically activated when the humidity falls below the set point. The controller activates the pump skid allowing water at 1000 psi into the high pressure lines. When the desired humidity level is reached, the system automatically shuts off.
Electrode Steam Humidifier 
The electrode heating system ensures reliable steam production from ordinary drinking water without additional water treatment. The special grid structure of the electrodes provides the largest possible surface area. The composition used for the electrodes ensures maximum power transmission to the humidifying water. This ensures reliable operation, effective steam production and long operating periods.
Ultrasonic humidifiers 
An ultrasonic humidifier uses a ceramic diaphragm vibrating at an ultrasonic frequency to create water droplets that silently exit the humidifier in the form of a cool fog. Usually the mist gets forced out by a tiny fan, while some ultra mini models have no fans. The models without fans are meant mainly for personal use. Ultrasonic humidifiers use a piezoelectric transducer to create a high frequency mechanical oscillation in a film of water. This forms an extremely fine mist of droplets about one micron in diameter, that is quickly evaporated into the air flow.Ultrasonic humidifiers should be cleaned regularly to prevent bacterial contamination from being spread throughout the air.
Flow through humidifiers 
Compressed air creates a vacuum that pulls water into the air. Mixing water with compressed air produced by cold water cloud. Nozzle functioning depends on the the vacuum generated power. When the system is running, the vacuum can not be change. This can damage the system.
Indoor Waterfalls 
Humidifalls use warm flowing water in a "closed-loop" recirculation design that minimizes water usage and creates optimal humidity conditions in any residential or commercial building.In most cases, such a system has been used for ventilation-equipped systems.

Humidification of materials and processes 

Problems due to low humidity.
Different levels of relative humidity provides adequate moisture content in all hygroscopic materials. Moisture content requirements varyVarious humidifiers & evaporative cooling systems have been helping improve productivity, sustainability and health in many commercial and industrial applications throughout the World a lot of years. Throughout various industries, the correct level of humidity is of such significant importance that it becomes an essential success factor for manufacturing productivity. For example, due to electrostatic charging, efficient handling of paper in the printing industry depends heavily on an appropriate level of air humidity. Moreover, various production procedures in the pharmaceutical industry are only conceivable of if the correct humidity is ensured. Waste heat from machines and procedural processes is neutralized through evaporative cooling.For office staff, air humidity has an essential impact on health and productivity. The correct humidity level in the respiratory air prevents the mucus membrane from drying out and reduces the risk posed by microorganisms and the occurrence of specific symptoms of illness.In residential properties, the right level of air humidity contributes to the health of residents by minimizing illness and aiding to keep resident comfortable by eliminating dry eyes, noses, and throats.Dust - Humidity binds dust and causes it to precipitate out of the atmosphere so when the air is dry dust and airborne pollutants are more prevalent.
Relative humidity 
When assessing the need for humidification, it is important to know how to humidity changes during the year. In order that the relative air humidity of about 50% on average in Europe at 20 degrees Celsius, it should be premises to irrigate about 4682 hrs., and dry about 1,303 hours. The need of moisture to a certain time of the day is casual.
Seasonal humidity problems 
A large part of northern Europe, dry air problems are seasonal, usually encountered in the winter heating season. Hot time of year almost spend in dry air, but when running air conditioners, powerful manufacturing facilities, possible natural relative humidity change.Winter heating season, the cold air is heated to room temperature. In the process, the outside air entering the moisture content is significantly reduced, in some cases even less than 10% relative humidity. Humidifying the air must be heated to maintain a constant and adequate relative humidity.
The cooling effect. Temperature reduction
Air conditioning of large industrial warehouses, including those which need to operate with open doors and windows, was until now impossible with conventional systems. Cooling effect can also be combined with humidity control to increase productivity in specific industries (paper, wood, textiles). Water is sprayed under pressure by special patented nozzles capable of generating very fine droplets, of less than 10 microns, which are immediately absorbed by the air without wetting surfaces and objects below. The results are significant: low cost of installation and operation, immediately effective, cooling effect is located only in areas of interest, possibility of installation in an enclosed, semi-open and open environment.
In the air relative humidity is often sufficient, but the premise where the production takes place humidity decreases significantly due to the heating, ventilation, heat emitted during production processes. For people plants, organic and even some inorganic substances are necessary for proper environmental conditions. Especially in winter, when the water content in the air is extremely low. We are not able to control the parameters of the outdoor air, but the air, which have their own premises can be adjusted.

© 2014 - 2016 Vandens lašai